The precaution of using the high speed CNC milling

1. （high speed CNC milling)When processing parts, the protective door must be closed, the head and hand are not allowed to stretch into the protective door, and the protective door is not allowed to be opened during processing;

2. (high speed CNC milling)In the process of processing, the operator shall not leave the machine tool without authorization. He shall keep a high degree of concentration and observe the running state of the machine tool. In case of any abnormal phenomenon or accident, the program operation shall be terminated immediately, the power supply shall be cut off and reported to the instructor in time, and other operations shall not be carried out;

3. It is strictly prohibited to tap the control panel and touch screen. It is strictly prohibited to knock the workbench, dividing head, fixture and guide rail;

4. It is strictly prohibited to open the CNC system control cabinet for viewing and touching without permission;

5. The operator shall not change the internal parameters of the machine tool at will. Interns shall not call or modify other programs not compiled by themselves;

6. (high speed CNC milling)On the machine tool control microcomputer, other operations are not allowed except program operation, transmission and program copy;